Monday, March 17, 2014

I2P2 Injury & Illness Prevention Program

        I2P2 Injury & Illness Prevention Program


There are six core elements to an effective safety program.

      1.Management Leadership

           2.Employee Participation

      3.Hazard Risk Assessment

      4.Hazard Prevention and Control

      5.Education and Training

      6.Program Evaluation

Each element plays a critical role in the success or failure of the safety program and possibly the business itself.While all of the elements are important, it is crucial to have the company management giving full support of the safety effort. Management has the power to build a safety culture and it starts with a commitment to safety.

1. Management Commitment

Write a safety policy.
Apply the policy to all by following the safety policies.
Give employees authority to stop jobs if they see unsafe acts.
Budget time for safety. Have a daily short safety reminder meeting before the start of each shift. 
Act on recommendations of employees that perform the task.
Allow resources of time and money to provide proper training.

$1 dollar invested in safety saves $3-6 dollars of cost.

Ask yourself "What are they dealing with that I'm not?

Accountability -must be clearly understood and encouraged. Managers must take responsibility for safety. Employees in turn must have self accountability for their unsafe acts.

Development of a safety culture that will correlate to success in business.
Create a vision that employees will and must understand.
Safety must be measured along with production.
Safety must be a value. Safety efforts are encouraged and rewarded, but not just the things that we can avoid like lost time accidents.

Safety professional responsibility- communicate what needs to be done. Organization determines the degree of power. Measure safety performance. Establish employee and management measurements. Correlate injury reduction efforts with operational goals. Encourage safety culture vs zero accidents

Management Engagement -must take responsibility for failure. Managers must add safety as a core issue that affects business growth. Senior management must instill safety. Everyone should establish a vision of safety excellence.

Servant Leadership-help support the employees.

Demonstrate Safety

Safety in organizational meetings
Safety goals
Engage safety activities
Accountability

Safety is how we operate
Safety is owned by everyone
Employees are empowered
Visible symbols
Part of key organizational events


2. Worker Participation

Benefits

Employee engagement is a fundamental principle of leadership. It instills ownership and provides valuable feedback for safety success and improvement.

Form a Safety Committee.
Set requirements for membership to the committee (good attendance, no accidents)
Delineate responsibilities
Set goals
Meet regularly (monthly is suggested)
Collect safety suggestions and action points. Act on suggestions and document process. Take meeting minutes.

Form Incident Investigation Teams
Accompany supervisor or safety manager,analyze the scene and recommend corrective actions.
Encourage co-workers to help build the safety culture in related issues. (Like not wearing safety glasses)

3. Hazard Identification and Risk Assessment

A hazard is the potential for harm.

A Job Hazard Analysis is a technique that focuses on job task, the worker, the tools and the work environment.

It is a proactive approach to prevent injuries.
A way to develop proper work procedures
Adds value to your bottom line by eliminating injury cost.

Benefits
Fewer injuries
Reduce workers compensation cost
Increase in productivity
Excellent training tool to bring awareness of hazards.

Where to start?

Talk with employees
Review incidents
Review all jobs
Prioritize to risk of exposure or injury

Hazard determination

What can go wrong?
What are the consequences ?
How could it arise?
Contributing factors?
How likely is it to occur?

Effective Analysis

Where is it happening?
Who or what is it happening to?
What precipitates the hazard?
The outcome that would occur should it happen (consequence)?

Steps of a JSA

Have manager and employee break down the job in steps

For each task:
What can go wrong?
What are the consequences?
How could it happen?
How likely is to happen?

Audit

Review quarterly or annually
Jobs change
Product change
Equipment change
People change

High frequency high severity jobs should be done first

Reporting Hazards

Include program requirements
Receive training on hazards
Carry out reporting
Safety committee
Management
Fellow employees

Management Responsibilities

Receive training
Direct hazard reporting process
Act on hazard reports
Provide resources to address hazards
  Financial
  Personal
  Equipment

Document

Submission process
Track hazard reporting
Determine trends
Safety committee minutes


4. Hazard Prevention and Control

Corrective Action

Identify control method for hazards that have been identified. 

Engineer the hazard out.
Administrative controls to lower exposure.
Personal Protective Equipment as a last resort.

Engineering Controls

Install catwalks
Replace equipment
Prevention through design
       Include safety guards
       Eliminate hazards before they are created

Administrative Controls

Change the way it's done.
Rotate employees
Adjust work schedules

Personal Protective Equipment

Hard hat

Eye Protection
  Safety glasses
  Goggles
  Faceshield

Respiratory protection
Hearing protection
Safety toe shoes
Gloves

Activities

Establish Emergency planning procedures
Preventive maintenance
High housekeeping standards
Document hazard control requirements
-lockout/tagout
-confined space
-fall protection
Post appropriate signage


5. Education and Training


Training is a process, not an event.

Level 1-Compliance training
Select the right environment
PowerPoint, DVD, Hands On, Visual
Problem posing scenarios
Interaction
Role playing

Click on this link to take you to our list of safety topics and free safety plans. Most of these topics will be applicable to your business.




 6. Program Evaluation

Audits:
Lockout/tagout
Confined Space Entry
Fall Protection
Housekeeping

Annual System Audit

Document review
Facility inspection
Employee interviews

Assessment

Document criteria
Set up scoring system. Have they done:

0-nothing on the topic
2-something
8-good, but not complete
10-excellent

Shows improvement or failing trends

Prioritize deficiencies

Red-high risk
Yellow-soon
Green-low risk

Define format
Define audience of who receives report
Define the frequency

Lagging Measures

Number of injuries
Injury rates
Near misses
Workers comp cost
Number of lost days
Number of restricted days
Number of first aid cases

Leading Measures

Number of audits
Deficiencies corrected
Number of behavioral audits
Percentage of safe behaviors
Safety improvement measures taken
Number of safety committee activities


Measuring failures do not tell the whole story. Use leading and lagging measures.

A Case for Investing in Safety

Injuries and Illnesses cost industry $170 billion annually

$1 dollar invested in safety saves $3-6 dollars of cost.

Direct Cost

Equipment replacement
Medical bills
Workers compensation premiums
Settlements
Loss of productivity
Damaged product
Recovery time and expense

Indirect Cost

Company image
Vendors going elsewhere
Loss of quality
Delays in delivery

Collect safety cost data
Create a track record
Integrate safety into operations

Lagging Measures

Number of injuries
Injury rates
Near misses
Workers comp cost
Number of lost days
Number of restricted days
Number of first aid cases

Leading Measures

Number of audits
Deficiencies corrected
Number of behavioral audits
Percentage of safe behaviors
Safety improvement measures taken
Number of safety committee activities


Measuring failures do not tell the whole story. Use leading and lagging measures.

Injury Management

Determine root causes
Determine trends
Determine preventive measures
Use data to support request for improvement Involve employees

Reporting

All injuries reported immediately
Train employees on this requirement
Corrective action if fail to do so
The sooner you know the better.

Focus
Surface cause
Root cause
Avoid blame

Categories of Investigations
Near miss
Property damage
First Aid
OSHA recordable

Investigation Team
Safety Professional
Employees doing the job
Supervisor in that department
Safety committee member

Goal
Who?
What?
Where?
When?
Why?



Ask "Why" five times

Acts vs conditions

90% of injuries are due to unsafe behavior

Need to dig deeper

Mitigation
Engineering
Administration
PPE

Communication
Injured employees
Physician
Insurance Carrier claims representative Management

Make up a list of light duty task that could be performed.

Write up a process for your system


Process in Action

Accompany the injured employee to the medical provider.
Obtain physical restrictions documents
Maintain communications
Manage modified duty assignments

Culture Change

Leadership
Employee participation
Safe work environment
Continuos improvement

Cultural integration
Priority
Value

Safety is how we operate
Safety is owned by everyone
Employees are empowered
Visible symbols
Make it part of key organizational events

Are you ready to get started? Here is a link to help you to start writing a plan.



Meiners Medical and Safety " Making the World a Safer Place, One Company at a Time".

Monday, March 3, 2014

AED Automated External Defibrillators

Today, a friend of mine had an internal defibrillator implanted in his chest. Yes, he is one of the lucky ones. Last week, while sitting around a table discussing some blueprints, my friend collapsed into Sudden Cardiac Arrest.

In the United States, about 1000 people a day are victims of sudden cardiac arrest. For the majority of these victims, the outcome will end in death. It doesn't have to end that way.



What you do in that situation can determine the outcome.

Call 911 / Quality CPR and use AED in less than 4 minutes … survival rate About 75%
Call 911 / Quality CPR until EMS arrives…… survival rate About 30%
Call 911 / Wait for Help…… survival rate Less that 10% 

Follow this link to plan the best possible outcome.......A life depends on it.

First Aid

1. There should be trained first aid personnel and first aid equipment on each job. The number of people trained in first aid, the type and amounts of equipment necessary will depend on the job factors such as number of employees, nature of the work, and location of the job. A small job of short duration will have different requirements than a large job of long duration or a job in a remote location.

2. CPR and First Aid training shall be periodically refreshed to maintain the skills that are required. Your certification must be from the American Red Cross or an equivalent provider.

3. Obtain first aid for every injury no matter how minor it might be. Neglecting a cut or scratch will encourage infection. Wounds that do not bleed, such as puncture wounds, are often the first to become infected.

4. A complete and proper first-aid kit and bloodborne pathogen kit must be on all job sites. Kits must be kept up to date and maintained. Eye wash stations must be equipped in areas that have chemicals or meet the standards.

5. All jobs must have emergency telephone numbers posted near the telephone.

FIRE PREVENTION AND PROTECTION

1. All empty cartons and wrappers are to be removed from the work area(s) as soon as practical and properly disposed of at the end of every workday. All storage and work areas are to be kept neat and free of debris at all times. Wipe up spills or gasoline, oil, paint, or flammable solvents promptly.

2. A 10:ABC dry chemical fire extinguisher must be located near the central storage area and must be maintained and readily available for instant use.

3. Smoke only in designated areas.

4. Avoid excessive dust build-up on stock, rafters, or ledges. Clean off dust and regularly lubricate electric motors and machinery to avoid friction and overheated bearings.

5. Store flammable liquids and gases in strict accordance with local codes. Dispense in approved type safety containers.

6. Stock should not be piled to within 18” of sprinkler heads and the area around control valves should be kept clear.

7. When utilizing heat producing equipment (welders, cutters, etc.) make sure that the area is clear of fire hazards, that all sources of potential fires are eliminated, and that adequate fire suppression equipment is in place and is readily accessible.

8. Do not use a salamander of other open-flamed devices in confined or enclosed structures. Vent heaters to the atmosphere and ensure adequate distances (a minimum of 3 feet) from walls, ceilings, floors, and other combustible items.

9. Know the locations of fire fighting equipment in your work area(s) and have a working knowledge of how to use it.

10. Discharged fire extinguishers need to be serviced immediately. Fire extinguishers also have to be visually inspected monthly and maintained yearly.


Fall Protection

POLICY

It is company policy that fall protection shall be addressed prior to any job through job briefings. Fall protection will be instituted when a fall potential exists that is equal to, or greater than standards set forth by OSHA. Fall protection may also be required by special client policies or specific hazards associated with a job. The most stringent of the requirements will be adhered to.

TRAINING

Company name shall provide each employee who might be exposed to fall hazards training. The training shall include recognition of the hazards of falling along with procedures to follow to minimize these hazards. Training shall be performed by the safety director or a competent person and shall cover the following:

a) the nature of fall hazards in the work area;

b) the correct procedures for erecting, maintaining, disassembling, and inspecting the fall protection systems to be used;

c) the use and operation of guardrail systems, personal fall arrest systems and other protection to be used;

d) the limitations on the use of mechanical equipment during the performance of roofing work on low sloped roofs;

e) the correct procedures for the handling and storage of equipment and materials and the erection of overhead protection;

f) the role of employees in fall protection plans;

g) the requirements contained in 29 CFR 1926 Subpart M


FREQUENCY OF TRAINING

Fall protection training shall be provided to each new field worker, annually as a refresher and as needed when an employee fails to show proper knowledge or retention of skills.

All training will be accompanied by a certification of training in the form of a sign-in sheet with both the instructor's name and signature and the student's name and signature.

FALL PROTECTION PLAN

Worksite Assessment and Fall Protection Systems Selection

Due to the various worksites, a fall protection plan needs to be addressed for each job where a fall potential exists. Identification of fall protection needs will be started prior to work through the use of the Pre-Job checklist, PPE Selection guide and the Job Hazard Analysis (JHA).

All fall protection systems selected for each application will be installed before an employee is allowed to go to work in an area that necessitates the protection. When selecting and purchasing fall protection equipment and supplies, they shall be approved for the purpose for which they are intended. Such fall protection equipment shall bear appropriate labels clearly indicating that the equipment meets or exceeds applicable ANSI and ASTM requirements.

This fall protection plan is intended to anticipate the particular fall hazards to which our employees may be exposed. Specifically, we:

• Inspect the area to determine what hazards exist or may arise during the work.
• Identify the hazards and select the appropriate measures and equipment.
• Give specific and appropriate instructions to workers to prevent exposure to unsafe conditions.
• Ensure employees follow procedures given and understand training provided..

Providing fall protection requires an assessment of each fall situation at a given jobsite. Our criteria for selecting a given fall protection system follow those established at 29 CFR 1926.502, fall protection systems criteria and practices.

GENERAL GUIDELINES

1. FALL PROTECTION

   A. Control of Work Area

  • Guarding of floor openings will be performed by utilizing barricades with top rails, mid rails and toe boards on all exposed sides.


  • Fixed and trap door openings shall be guarded by floor opening covers of appropriate strength and construction and be secured as to prevent displacement.


  • Scrap and refuse material should be placed in proper containers. Keep general working area free of clutter and obstacles.


  • Slippery floors cause falls. Keep the floor clean and dry.


  • In the event that another contractor in the area has created a fall hazard or a fall hazard is discovered. STOP WORK until the fall hazard can be abated. Otherwise, all persons working in the area will have to utilize Personal Fall Protection devices.


   B. Personal Fall Protection
Personal Fall Protection devices will be used whenever a fall potential cannot be controlled by the use of covers, barricades, etc.

   1. Prior to donning or using fall protection equipment, each component must be inspected prior to use. Any damage outside of the manufacturer’s specs will cause the piece of equipment to be deemed un-usable. All damaged fall protection equipment will be taken out of service and returned to the shop for final disposition.

   2. Employees will be provided with fall protection, i.e. full body harnesses and lanyards when working at defined fall exposure elevations when no other type of fall protection is provided. The lanyard shall be securely attached to the employee 100% of the time. Lifelines shall be secured above the point of operation whenever possible to an anchorage or structural member capable of supporting a minimum dead weight of 5,000 pounds.

  It is important to ensure that adequate distance is available for fall protection devices to work. When using a deceleration type lanyard, upwards of 18' many be required as apposed to a retractable needing far less. Fall Protection Equipment needs to be selected for the job and may require the assistance of the Safety Director to properly implement.

   3. The foreman may need to make a determination between the use of fall restraint vs fall protection - This will very from job to job. The goal is to eliminate falls.

  4. When employees are utilizing boom type aerial lifts, fall restraint will be used as opposed to traditional decelerator lanyards. This is to keep the employee from being ejected from the safety of the aerial lift. The railing installed on the aerial lift is the fall protection.

3. Rescue

When planning work requiring the use of a full body harnesses, care must be taken to identify rescue procedures for workers. In the event of a fall where an employee is caught by his personal fall protection equipment, measures must be taken to immediately and safely bring the employee back to solid ground.

Orthostatic intolerance may be experienced by workers using fall arrest systems. Following a fall, a worker may remain suspended in a harness. The sustained immobility may lead to a state of unconsciousness. Depending on the length of time the suspended worker is unconscious/immobile and the level of venous pooling, the resulting orthostatic intolerance may lead to death.
While not common, such fatalities often are referred to as "harness-induced pathology" or "suspension trauma." Unconscious/immobile workers suspended in their harness will not be able to move their legs and will not fall into a horizontal position, as they would if they fainted while standing. During the static upright position, venous pooling is likely to occur and cause orthostatic intolerance, especially if the suspended worker is left in place for some time. Venous pooling and orthostatic intolerance can be exacerbated by other circumstances related to the fall. For example, shock or the experience of the event that caused the fall, other injuries, the fit/ positioning of the harness, the environmental conditions, and the worker’s psychological state all may increase the onset and severity of the pooling and orthostatic intolerance. Unless the worker is rescued promptly using established safe procedures, venous pooling and orthostatic intolerance could result in serious or fatal injury, as the brain, kidneys, and other organs are deprived of oxygen.

Signs & symptoms that may be observed in an individual who is approaching orthostatic intolerance:
Faintness, Nausea, Breathlessness, Dizziness, Sweating, Unusually Low Heart Rate, Paleness, Unusually Low Blood Pressure, Hot Flashes, "Greying" or Loss of Vision and Increased Heart Rate.

Factors that can affect the degree of risk of suspension trauma:
Inability to move legs, Hypothermia, Pain, Shock Injuries during fall, Cardiovascular disease, fatigue, Respiratory disease, Dehydration and Blood loss.

Electrical Safety

1. WORK IN EXCESS OF 50 VOLTS

             A.  PURPOSE
Qualified and competent electrical workers are required to perform a variety of tasks with and around higher voltage electricity, electrical equipment, and apparatus. The nature of such work necessitates an understanding of applicable safety policy and rules.

Many electrical hazards and work practices are the same regardless of the voltage involved. However, due to the nature of high voltage work, there are many hazards and work practices that are specifically related to high voltage.

The following standards and sections provide information for repairing, servicing, construction, and maintaining electrical circuits and equipment that are supplied by systems of 50 Volts or more.

To Read The Full Article CLICK HERE

Discipline in Support of Safety

ROLE OF DISCIPLINARY SYSTEMS IN THE WORKPLACE

a) The disciplinary system of company name in support of safety does not exist to punish employees. Its purpose is to help control the work environment so that workers are protected and accidents are prevented. The disciplinary system helps ensure workplace safety and health by letting the company’s employees know what is expected of them. It provides workers with opportunities to correct their behavior before an accident happens.

b) The disciplinary system is one of the keys to successfully implementing the company’s safety and health program. It ensures that the company’s rules and safe working practices are taken seriously by employees and are actually followed. It lets employees know how the company expects them to operate in relation to the goals of the company’s safety and health program. And it lays out the actions the company will take if individuals do not meet the company’s expectations. The employees’ supervisor and all members of management are responsible for the enforcement of this disciplinary program.

c) A disciplinary system cannot work in a vacuum. Before the company can hold employees accountable for their actions, the company first has established its safety and health policy and disciplinary rules.

1. POLICY STATEMENT FOR ENFORCEMENT OF SAFETY

a) Employees need to know the company’s position on safety and health and what the company expects of them. They need a clear understanding of the rules and the consequences of breaking those rules. This is true in all areas of work, but it is especially important for worker safety and health.

b) As part of the policy statement, and in the employee safety handbook, the company has a written statement setting forth the company’s disciplinary policy.

c) The company Safety Coordinator, company managers and supervisors will always be on the lookout for safety violations and will conscientiously and vigorously enforce the company’s commitment to safety. On a company job site, the Site Supervisor has specific responsibility for enforcing company safety rules, policies and safe work procedures.

2. EMPLOYEE INFORMATION AND TRAINING

a) It is important that employees understand the system and have a reference to turn to if they have any questions. Therefore, in addition to issuing a written statement of the company’s disciplinary policy, the company has drawn up a list of what it considers major violations of company policy and less serious violations. This list specifies the disciplinary actions that will be taken for first, second, or repeated offenses. The company will use the 5 Step Disciplinary System listed in Appendix B to correct minor “General Offenses.”

b) Disciplinary violations that are grounds for immediate suspension and penalties up to and including termination of employment specifically include:

i) Fighting, provoking or engaging in an act of violence against another person on company property;

ii) Failure to follow written or verbal safe work procedures, company safety rules or authorized posted safety instructions;

iii) Willful damage to property;

iv) Failure to wear personal protective equipment (eye protection, hearing protection, safety helmets, etc.);

v) Not using safety harnesses and lanyards when fall protection is required;

vi) Removing and/or making inoperative safety guards on tools and equipment;

vii) Tampering with machine safeguards or removing machine tags or locks;

viii) Removing barriers and/or guardrails and not replacing them;

ix) Failure to follow recognized industry practices;

x) Failure to follow rules regarding the use of company equipment or materials;

xi) Major traffic violations while using a company vehicle;

xii) Engaging in dangerous horseplay;

xiii) Failure to notify the company of a hazardous situation;

xiv) Theft;

xv) Violation of company policies regarding alcohol, non-prescription and illegal drugs; and

xvi) Other major violations of company rules or policies.

c) Company supervisors, managers and personnel who have specific responsibilities for implementation and management of safety are expected to know, understand, support, implement and enforce the company’s policies, procedures, posted instructions and work practices relating to safety.

In the event that the company determines through direct observations, inspections, reviews of documentation and training or by other objective means that a supervisor, manager or authorized person has not performed his or her safety responsibilities, this shall be considered a disciplinary violation, punishable in the same way that misbehaviors explained in 3 b) are punishable.

3. TRAINING

a) Training can reduce the need for disciplinary action. The company shall instruct employees in the importance of workplace safety and health, the need to develop safety habits, the company’s operations, safe work practices, and the hazards they control, and the standards of behavior that the company expects.

b) The company’s employees must understand the disciplinary system and the consequences of any deliberate, unacceptable behavior.

4. SUPERVISION

a) Supervision includes both training and corrective action.

b) Ongoing monitoring of the company’s employees' work and safety habits gives the company’s supervisors the opportunity to correct any problems before serious situations develop. In most cases, effective supervision means correcting a problem before issuing any punishment.

c) Where the relationship between employees and their supervisors is open and interactive, problems are discussed and solutions are mutually agreed upon. This type of relationship fosters a work environment where the need for disciplinary action is reduced. When such action is needed, the parties are more likely to perceive it as corrective action rather than punitive.

5. EMPLOYEE INVOLVEMENT

a) Employees are encouraged to help informally in the enforcement of rules and practices. The intent here is not to turn employees into spies and informers, but to encourage them to be their "brother's keeper" and to watch out for the safety and health of their colleagues.

b) Many employers successfully have encouraged an atmosphere -- a company "culture" – where employees readily speak up when they see an easily corrected problem, for example, a coworker who needs reminding to put on safety goggles.

c) Unless the safety violation is so serious that it requires immediate suspension and review for termination, the company’s employees deserve the opportunity to correct their own behavior problems.

d) An effective disciplinary system is a 2-way process. Once a problem is spotted, discuss it with the employee, who should be given at least 1 or 2 opportunities to change the behavior or correct the problem.

e) Only after these discussions (and possibly some retraining) should disciplinary action be taken.


6. APPROPRIATE CONTROL MEASURES

a) Disciplinary actions need to be proportionate to the seriousness of the offense and the frequency of its occurrence. It is certainly inappropriate to fire someone for occasional tardiness. It is equally inappropriate to issue only oral warnings to an employee who repeatedly removes a machine guard. Appendix B provides an example of disciplinary actions in a five-step disciplinary system.

b) Disciplinary procedures should not be instituted without explanation. The company will provide feedback to the employee on what behavior is unacceptable, why the corrective action is necessary, and how the employee can prevent future violations and disciplinary action.

c) In addition, supervisors should take time to recognize an employee who improves or corrects his/her behavior.

7. CONSISTENT ENFORCEMENT

a) Workers must realize that safe work practices are a requirement of employment and that unsafe practices will not be tolerated. It is necessary, therefore, that the employer has a disciplinary system that is implemented fairly and consistently.

b) If the company’s disciplinary system is to work well and be accepted by the company’s workforce, the system applies equally to everyone. This includes subjecting managers and supervisors to similar rules and similar or even more stringent disciplinary procedures.

c) For minor violations, supervisors shall meet with the employee to discuss the infraction and inform the employee of the rule or procedure that was violated AND describe the corrective action needed to remedy the situation.

8. DOCUMENTATION

a) One key to ensuring fairness and consistency in a disciplinary system is keeping good records.
It is in the best interest of both the company and the employee to have written rules and disciplinary procedures.

b) It is just as important to document instances of good or poor safety and health behavior, including discussions with the employee, and to place relevant information in the employee's personnel file.

c) The Safety Hazard Citation format below shall be used to document infractions.

d) Documentation serves a variety of purposes. It helps the company to track the development of a problem, corrective actions, and the impact of measures taken. It provides information so the company can keep employees informed of problems that need correction.

e) When the company is evaluating the managerial and supervisory skills of a supervisor, it provides a useful record of how they handled problems.

f) If warnings, retraining, and other corrective actions fail to achieve the desired effect, and if the company decides to discharge an employee, then documentation becomes even more critical. Conversely, the company will conduct an annual clearing of the personnel files of employees whose good overall safety records are marred by minor warnings.

g) Minor safety violations will be documented in a manner comparable to the example below, and a copy of the form will become part of the employee’s personnel record.  Three citations can be grounds for termination.

Safety Hazard Citation
Date:
Name of Violator
Location of Violation
Type of Violation

Signature of Employee Cited
A copy of this Citation will be placed in the employee’s Employment File.
Three Citations can be grounds for termination.

9. POSITIVE REINFORCEMENT

a) Each supervisor should provide frequent reinforcement of work practices training.

b) Informal observation serves not only to gauge training effectiveness, but also to reinforce the desired behavior.

c) Supervisors should also provide special recognition for the use of safe work practices. For examples, supervisors may hand out "Thank you for working safely" cards that can be redeemed for a free cup of coffee or soft drink when they observe a positive safety behavior.

d) When a supervisor periodically observes individual workers at their tasks, he or she should give oral and/or written feedback on what was done safely.

e) OSHA recommends award systems that recognize positive activities rather than absence of injuries. Supervisors and safety managers should be aware that award programs with prizes for hours worked without injury may have the unintended consequence of putting heavy peer pressure on workers NOT to report injuries.


APPENDIX A


Tracking of Individual
Safety Disciplinary Actions

Employee ________________________________________________________________


TRACKING

First Offense
Date &
Response

Second Offense
Date &
Response

Repeated Violation
Date &
Response



Unsafe Work Habits





Refusal to
Follow Safety Instructions






APPENDIX B

Five-Step Discipline System

First violation: Instruction/discussion concerning violation, proper procedures, and
                                the hazards they control; notation for the supervisor's file.

Second violation: Re-instruction with notation in the employee's personnel file.

Third violation: Written warning describing the violation and actions that will be
                                 taken if it recurs.

Fourth violation: Final warning; may include suspension.

Fifth violation: Discharge.

It is company philosophy that all employees be trained in proper safety procedures and employees are expected to follow and adhere to all aspects of company Safety Program. The close observance of all Federal, local and client rules and regulations will be monitored at all times.

If there is an infraction of these rules and regulations the following disciplinary action will be taken:


Minor Infraction Definition: Any infraction of government, corporate or client rules that does not have the immediate potential of causing serious damage or injury.
       1st offense – verbal warning from supervisor or management
       2nd offense – written notice with notice placed on file
       3rd offense – written notice + time off without pay 4th offense – termination of  employment                            


Major Infraction Definition: Any infraction of government, corporate or client rules that does have the potential to cause immediate serious damage or injury.
        1st offense – time off without pay; or termination
        2nd offense – termination of employment.